SISTEM PENGAMANAN PINTU MENGGUNAKAN E-KTP BERBASIS ARDUINO UNO MEGA2560
Keywords:Door security, Arduino Mega2560, E-KTP, RFID
In the era of the industrial revolution 4.0 today, many technologies are used by humans to help their daily activities, one of which is in the field of home door security. To improve the security of home doors, we can use the Arduino Mega2560 as a control center, we can design a prototype for a door security system using E-KTP which is equipped with several sensors to improve the security of the door that is used as access for entry and exit. E-KTP is a card that is used as a person's identification and can also be used as a tool to open the door in the design of this tool, because in it there is a chip that can be read using electromagnetic waves. RFID (Radio Frequency Identification) is a sensor that can be used to read E-KTP, and to control it remotely, we can use the SMS (Short Message Service) service that is on every Cellphone / Smartphone so that the security of the house door is better because it is also equipped with Magnetic sensors and Buzzer as security if the door is forced to open by an irresponsible person.
N. Marpaung, “Perancangan Prototype Jemuran Pintar Berbasis Ardunio Uno R3 Menggunakan Sensor LDR Dan Sensor Air,” Riau J. Comput. Sci., vol. 3, no. 2, pp. 71–80, 2017.
Alimuddin, “SISTEM PARKIR CERDAS SEDERHANA BERBASIS ARDUINO MEGA 2560 Rev3,” Electro Luceat, vol. 4, no. 1, pp. 20–31, 2018, doi: 10.32531/jelekn.v4i1.79.
A. N. Rahman, “Sistem pembayaran kantin menggunakan teknologi rfid,” J. Mhs. Tek. Inform., vol. 1, no. 1, pp. 121–126, 2017.
S. Siswanto, G. P. Utama, and W. Gata, “Pengamanan Ruangan Dengan Dfrduino Uno R3, Sensor Mc-38, Pir, Notifikasi Sms, Twitter,” J. RESTI (Rekayasa Sist. dan Teknol. Informasi), vol. 2, no. 3, pp. 697–707, 2018, doi: 10.29207/resti.v2i3.592.
M. Risal, A. H. Munandar, and A. R. Wali, “Prototype Pengontrolan Alat Elektronik Masjid Berbasis Arduino,” J. INSTEK (Informatika Sains dan Teknol., vol. 3, no. 1, pp. 81–90, 2018, doi: 10.24252/instek.v3i1.4822.
M. Noviansyah and H. Saiyar, “PERANCANGAN ALAT KONTROL RELAY LAMPU RUMAH VIA MOBILE,” J. AKRAB JUARA, vol. 4, no. November, pp. 85–97, 2019.
K. Sari, C. Suhery, and A. Arman, “IMPLEMENTASI SISTEM PAKAN IKAN MENGGUNAKAN BUZZER DAN APLIKASI ANTARMUKA BERBASIS MIKROKONTROLER,” J. Coding Sist. Komput. Untan, vol. 03, no. 5, pp. 111–122, 2015.
Y. N. I. Fathulrohman and Asep Saepuloh, “Jurnal manajemen dan teknik informatika,” ALAT Monit. SUHU DAN KELEMBABAN MENGGUNAKAN ARDUINO UNO Yusuf, vol. 02, no. 01, pp. 181–190, 2018.
Andi Rosman, “Perancangan Power Supply 4.5 dan 11.5 Volt Menggunakan Rangkaian Regulator Zener Follower,” J. Sci. pinisi, vol. 3, no. April, pp. 55–59, 2017.
A. Feriska and D. Triyanto, “Rancangan Bangunan Penjemur Dan Pengering Pakaian Otomatis Berbasis Mikrokontroler,” J. Coding Sist. Komput. Untan, vol. 5, no. 2, pp. 67–76, 2017.
How to Cite
Copyright (c) 2021 anggi sianipar
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright in each article belongs to the author.
- The authors admit that RESISTOR Journal as a publisher who published the first time under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) License.
- Authors can include writing separately, regulate distribution of non-ekskulif of manuscripts that have been published in this journal into another version (eg sent to respository institution author, publication into a book, etc.), by recognizing that the manuscripts have been published for the first time in RESISTOR Journal